DRUM MIC KIT

DK7

Smart design. Sonic brilliance. Built tough.

From $2999

DRUM MIC KIT

DK7

Smart design. Sonic brilliance. Built tough.

Seven Alone. One Together.

On their own, each microphone in the Earthworks DK7 kit is best in its class. When combined, they capture the full complexity of your drumkit.

Your Drums. Your Sound.

The DK7 makes whatever drum kit you’re miking sound like just that―you. A crystal clear translation of your sound.

Lightning Fast

Nothing compares to the lightning speed of the DM20. Every detail, every nuance, and every texture remains flawlessly intact.

Your Drums. Your Sound.

The DK7 makes whatever drum kit you’re miking sound like just that―you. A crystal clear translation of your sound.

Lightning Fast

Nothing compares to the lightning speed of the DM20. Every detail, every nuance, and every texture remains flawlessly intact.

Bring It All Together

A perfect sonic image of your whole kit from above. A matched pair of Earthworks SR25s bring transparency, clarity, and attack to your drum sound.

Punch Through the Mix

With handling capabilities of 150dB SPL, and a cardioid condenser capsule that captures the full spectrum of sound all the way down to 20Hz, the Earthworks SR20LS captures every detail you’re after.

Isolation Like Never Before

Massive rear rejection and a polar pattern that’s consistent across the entire frequency range means any off-axis leakage is virtually nonexistent.

Specifications

DM20

Frequency Response 20Hz – 20kHz
Polar Pattern Cardioid
Sensitivity 8mV/Pa (-42dBV/Pa)
Power Requirements 24-48V Phantom, 10mA
Max Acoustic Input 150dB SPL
Signal-to-Noise Ratio 74dB A-weighted
Output XLR (pin 2+)
Output Impedance 200Ω balanced (between pins 2 & 3)
Min Output Load 1000Ω between pins 2 & 3
Noise 20dB SPL equivalent (A weighted)
Dimensions (L x D) 282mm x 22mm (11.12 x .860 inches)
Gooseneck Length 121mm (4.75 inches)
Weight .55 lb. (.25kg)

SR25

Frequency Response 20Hz – 25kHz
Polar Pattern Cardioid
Sensitivity 10mV/Pa (-40dBV/Pa)
Power Requirements 24-48V Phantom, 10mA
Max Acoustic Input 145dB SPL
Output XLR (pin 2+)
Output Impedance 65Ω balanced (between pins 2 & 3)
Min Output Load 600Ω between pins 2 & 3
Noise 20dB SPL equivalent (A weighted)
Dimensions (L x D) 165mm x 22mm (6.5 x .860 inches)
Weight .35 lb. (160g)

SR20LS

Frequency Response 20Hz – 20kHz
Polar Pattern Cardioid
Sensitivity 3mV/Pa (-50dBV/Pa)
Power Requirements 24-48V Phantom, 10mA
Max Acoustic Input 150dB SPL
Signal-to-Noise Ratio 74dB A-weighted
Output XLR (pin 2+)
Output Impedance 200Ω balanced (between pins 2 & 3)
Min Output Load 1000Ω between pins 2 & 3
Noise 20dB SPL equivalent (A weighted)
Dimensions (L x D) 192mm x 22mm (7.57 x .860 inches)
Weight .36 lb. (164g)
It felt like taking a pair of isolation headphones off and listening to the actual natural sound of everything. Stunning!
Casey Cooper, COOP3RDRUMM3R
Earthworks mics allow me to capture how my drums sound in the room, and pass along information in a truly transparent way.
Adam Tuminaro, THE ORLANDO DRUMMER
Each mic in the DK7 kit takes EQ like a champ, especially the DM20 on toms. With a few simple EQ tweaks, I achieved thunderous results that made my drummer ecstatic, both with what he heard in his in-ear monitors and what was felt in the room on playback.
Paul Vnuk Jr., RECORDING MAGAZINE
Earthworks mics have the detail and clarity I need in the studio and on stage. I have never heard my instruments sound this REAL!!!!
Carter McLean, FOUR HANDS DRUMMING