BASS DRUM MICROPHONE

SR20LS

Natural highs. Deep lows. Sound you can feel.

BASS DRUM MICROPHONE

SR20LS

Natural highs. Deep lows. Sound you can feel.

Punch through
the mix.

Don’t be fooled by its small size. The SR20LS won’t miss a beat on your bass drum. With handling capabilities of 150dB SPL and a cardioid condenser capsule that captures the full spectrum of sound all the way down to 20Hz, the Earthworks SR20LS beautifully captures all of the deep, rich lows you’re after.

Never Boomy

A subtle proximity effect makes it easy to place the mic to capture your bass drum, without getting that boomy sound.

Ready For Anything

If it can handle a jet engine, it can handle you bass drum. With an SPL rating of 150dB, you never need to worry about overloading the SR20LS.

Never Boomy

A subtle proximity effect makes it easy to place the mic to capture your bass drum, without getting that boomy sound.

Ready For Anything

If it can handle a jet engine, it can handle your bass drum. With an SPL rating of 150dB, you never need to worry about overloading the SR20LS.

Specifications

FREQUENCY RESPONSE 20Hz – 20kHz
POLAR PATTERN Cardioid
SENSITIVITY 3mV/Pa (-50dBV/Pa)
POWER REQUIREMENTS 24-48V Phantom, 10mA
PEAK ACOUSTIC INPUT 150dB SPL
OUTPUT XLR (pin 2+)
OUTPUT IMPEDANCE 200Ω balanced (between pins 2 & 3)
MIN OUTPUT LOAD 1000Ω between pins 2 & 3
SELF NOISE 20dB SPL equivalent (A weighted)
DIMENSIONS L x D 192mm x 22mm (7.57 x .860 inches)
WEIGHT .36 lb (164g)
USER GUIDE
The SR20Ls is getting all of the attack that I want, but it still have a really solid and thick low end.
Adam Tuminaro, THE ORLANDO DRUMMER

Additional products