DRUM MIC KIT
DK7
Smart design. Sonic brilliance. Built tough.
DRUM MIC KIT
DK7
Smart design. Sonic brilliance. Built tough.
Seven Alone.
One Together.
On their own, each microphone in the Earthworks DK7 kit is best in its class. When combined, they capture the full complexity of your drumkit.
It felt like taking a pair of isolation headphones off and listening to the actual natural sound of everything. Stunning!
Earthworks mics allow me to capture how my drums sound in the room, and pass along information in a truly transparent way.
Each mic in the DK7 kit takes EQ like a champ, especially the DM20 on toms. With a few simple EQ tweaks, I achieved thunderous results that made my drummer ecstatic, both with what he heard in his in-ear monitors and what was felt in the room on playback.
Earthworks mics have the detail and clarity I need in the studio and on stage. I have never heard my instruments sound this REAL!
Your Drums. Your Sound.
The DK7 makes whatever drum kit you’re miking sound like just that―you. A crystal clear translation of your sound.
Lightning Fast
Nothing compares to the lightning speed of the DM20. Every detail, every nuance, and every texture remains flawlessly intact.
Your Drums. Your Sound.
The DK7 makes whatever drum kit you’re miking sound like just that―you. A crystal clear translation of your sound.
Lightning Fast
Nothing compares to the lightning speed of the DM20. Every detail, every nuance, and every texture remains flawlessly intact.
Bring It All Together
A perfect sonic image of your whole kit from above. A matched pair of Earthworks SR25s bring transparency, clarity, and attack to your drum sound.
Punch Through the Mix
With handling capabilities of 150dB SPL, and a cardioid condenser capsule that captures the full spectrum of sound all the way down to 20Hz, the Earthworks SR20LS captures every detail you’re after.
Isolation Like Never Before
Massive rear rejection and a polar pattern that’s consistent across the entire frequency range means any off-axis leakage is virtually nonexistent.
Specifications
DM20
| Frequency Response | 20Hz – 20kHz |
| Polar Pattern | Cardioid |
| Sensitivity | 8mV/Pa (-42dBV/Pa) |
| Power Requirements | 24-48V Phantom, 10mA |
| Max Acoustic Input | 150dB SPL |
| Signal-to-Noise Ratio | 74dB A-weighted |
| Output | XLR (pin 2+) |
| Output Impedance | 200Ω balanced (between pins 2 & 3) |
| Min Output Load | 1000Ω between pins 2 & 3 |
| Noise | 20dB SPL equivalent (A weighted) |
| Dimensions (L x D) | 282mm x 22mm (11.12 x .860 inches) |
| Gooseneck Length | 121mm (4.75 inches) |
| Weight | .55 lb. (.25kg) |
SR25
| Frequency Response | 20Hz – 25kHz |
| Polar Pattern | Cardioid |
| Sensitivity | 10mV/Pa (-40dBV/Pa) |
| Power Requirements | 24-48V Phantom, 10mA |
| Max Acoustic Input | 145dB SPL |
| Output | XLR (pin 2+) |
| Output Impedance | 65Ω balanced (between pins 2 & 3) |
| Min Output Load | 600Ω between pins 2 & 3 |
| Noise | 20dB SPL equivalent (A weighted) |
| Dimensions (L x D) | 165mm x 22mm (6.5 x .860 inches) |
| Weight | .35 lb. (160g) |
SR20LS
| Frequency Response | 20Hz – 20kHz |
| Polar Pattern | Cardioid |
| Sensitivity | 3mV/Pa (-50dBV/Pa) |
| Power Requirements | 24-48V Phantom, 10mA |
| Max Acoustic Input | 150dB SPL |
| Signal-to-Noise Ratio | 74dB A-weighted |
| Output | XLR (pin 2+) |
| Output Impedance | 200Ω balanced (between pins 2 & 3) |
| Min Output Load | 1000Ω between pins 2 & 3 |
| Noise | 20dB SPL equivalent (A weighted) |
| Dimensions (L x D) | 192mm x 22mm (7.57 x .860 inches) |
| Weight | .36 lb. (164g) |
